A few of the trade’s greatest names in check and measurement, together with Rohde & Schwarz, Teledyne FLIR, and Keysight Applied sciences, not too long ago launched new check and measurement instruments to {the marketplace}.
The R&S SMB100B sign generator. Picture used courtesy of Rohde & Schwarz
Whereas Rohde & Schwarz and FLIR focused lab settings with sign mills and infrared cameras, respectively, Keysight centered on RF circuit simulation. These bulletins make clear the place engineering researchers are investing their efforts, from 5G to 3D packaging.
R&S Unveils Analog Microwave Sign Generator
Rohde & Schwarz not too long ago introduced its new SMB100B analog microwave sign generator for analysis and improvement (R&D) settings.
Key to the SMB100B’s enchantment is its frequency vary, which spans from 8 kHz to three GHz or 6 GHz, relying on the mannequin. This broad spectrum permits it to cowl the wants of varied functions, from low-frequency contexts to microwave necessities. Moreover, the instrument delivers a excessive output energy of as much as +34 dBm, mixed with a setting decision of 0.01 Hz, to allow exact sign era and modulation.
SSB part noise of the R&S SMB100B base unit at 1 GHz (measured). Picture used courtesy of Rohde & Schwarz
The SMB100B excels at sign purity with a specified non-harmonic suppression of sometimes -70 dBc for frequencies beneath 3 GHz when the output is about to +10 dBm. This characteristic minimizes the potential for sign interference, which might distort experimental or operational outcomes in delicate functions.
Furthermore, the SMB100B helps a big selection of analog modulation modes, together with AM, FM, φM, and pulse modulation. Digital modulation capabilities are additionally in depth; the generator can deal with the newest requirements, reminiscent of 3G, 4G, and 5G, making it extremely related for testing fashionable communication units and techniques.
Teledyne FLIR Introduces Infrared Cameras
Teledyne FLIR not too long ago launched its subsequent era of X-series infrared cameras tailor-made for indoor labs and open-air check ranges. The brand new fashions embrace the X6980 HS high-speed and the X8580 high-resolution households, designed to boost efficiency in capturing mid-wave (MWIR) and long-wave (LWIR) infrared spectra.
A notable characteristic of those cameras is their sturdy connectivity and knowledge integrity. Each fashions are geared up with 10GigE and CoaXPress (CXP) 2.1 high-speed interfaces, permitting over one hour of steady, high-speed picture streaming and knowledge switch. This characteristic maintains the extent of knowledge constancy essential for correct and environment friendly knowledge evaluation in crucial testing situations.
The cameras additionally embrace an on-camera recording choice with a detachable nonvolatile reminiscence categorical (NVMe) solid-state drive (SSD). This new addition permits lossless recording of great thermal occasions and contains a regular four-terabyte, high-speed SSD that may document a number of hours of knowledge with out dropping frames.
The X6980HS and X8580HS cameras within the subject. Picture used courtesy of Teledyne FLIR
In accordance with FLIR, these cameras are significantly fitted to protection, educational, and business analysis environments the place exact, high-speed, and high-resolution thermal knowledge seize is crucial. The FLIR X-series HS fashions additionally provide proprietary set off and synchronization capabilities, enabling exact timing for experiments and exams requiring recording synchronization throughout numerous knowledge streams.
FLIR has paired these cameras with its Analysis Studio software program to assist mix and synchronize knowledge units from a number of sensors, together with different FLIR A-series, X-series, and T-series cameras. This integration promotes complete evaluation and improved determination assist, standardizing the operational setting to scale back prices and improve the interchangeability of kit throughout numerous functions.
Keysight Releases RF Circuit Simulation
Keysight Applied sciences not too long ago launched W5600E RFPro Circuit, an RF simulation instrument designed to boost the effectivity and effectiveness of RF built-in circuit (RFIC) designers.
Keysight’s W5600E RFPro Circuit. Picture used courtesy of Keysight Applied sciences
Suitable for operation inside main EDA platforms like Cadence Virtuoso and Synopsys Customized Compiler, this instrument helps superior multi-physics simulation particularly for functions coping with advanced 3D packaging challenges.
The W5600E RFPro Circuit contains a modular structure that enables customers to co-design circuit, electromagnetic, and electrothermal simulations. Keysight has additionally integrated superior evaluation capabilities, reminiscent of high-accuracy modulation, Winslow stability, and system-level waveform simulation.
This instrument is at the moment accessible for the Cadence Virtuoso and Synopsys environments, with anticipated integration into the Keysight ADS setting later within the yr.
T&M Evolves With Extra Cloud-Based mostly Networks
These three bulletins every level to the shifting nature of check and measurement instruments within the age of 5G. As networks proceed to transition from conventional, monolithic architectures to disaggregated, cloud-based networks, testing strategies should additionally modify to confirm new wi-fi applied sciences.
A digital Check and Measurement Discussion board, hosted by RCRWireless Information, will happen on April 30, 2024, to debate present and future developments within the T&M trade.