Cisco Catalyst Heart Template Labs – Dynamic Automation, Half 8

Overview

On this episode of our ongoing Catalyst Heart Automation Collection, our focus is on utilizing a number of dynamic approaches to automating the community. We’ve beforehand, within the sequence, concentrated our efforts on particular ideas regarding automation. Nonetheless, on this Self-Paced Standalone Lab, we are going to begin to mix varied concepts to provide you a extra in-depth take a look at what is feasible by automation supplied by Catalyst Heart. We’ll automate the entry layer with Dynamic templates, which might auto-provision ports based mostly on PoE occasions. Throughout this lab, we are going to make the most of varied velocity templates mentioned in Lab 7 to take care of particular use circumstances in order that Catalyst Heart provisioning can allow these use circumstances through automation. This allows you, the community administrator, with the aptitude to unravel extra forms of configuration points from Catalyst Heart and to take care of the dynamics of an enterprise community.

In contrast to the earlier Labs within the sequence, this lab is a self-contained lab and has no dependencies on any of the earlier labs. When you can add ideas from Labs 5 and 6 to this lab, it’s designed to don’t have any pre-configuration. It makes use of varied automation strategies to indicate the entire artwork of the attainable in a non-Software program Outlined Entry method.

Inside this sequence, we cowl the next;

1. PnP Preparation – explains the general Plug and Play arrange steps
2. Onboarding Templates – explains in-depth the best way to deploy Day 0 templates
3. Day N Templates – dives into Day N template constructs with each common and composite templates and use circumstances
4. Software Policys – explores Software Policys and SD-AVC in Catalyst Heart and their use
5. Telemetry – explains the best way to deploy Telemetry for assurance
6. Superior Automation – explores Superior Automation strategies
7. Dynamic Automation – a deployment lab for dynamic automation

What’s going to I study within the Dynamic Automation Lab?

That is an enablement kind module inside the Wired Automation lab, and it permits clients to succeed in past what they at the moment perceive by attempting new ideas, actually pushing the boundaries of automation. We’ll cowl varied matters about template logic to unravel a number of use circumstances throughout this lab. We cowl some earlier ideas with an in-depth give attention to broadening their capabilities.

The idea of this lab is so that you can construct the setting from Discovery and PnP by to deployment. Permitting a protected place so that you can strive, modify, and get used to the assorted ideas and approaches.

Strategy

Preparation

The Lab is constructed for minimal intervention making use of issues like Relaxation-API run through Postman inside a set runner to rapidly configure Catalyst Heart. This permits us to deploy Settings, Credentials, Uncover Units, Construct Websites, Buildings, Flooring, and assign the gadgets to these websites. It is a highly effective instance of what may be completed, as a result of it demonstrates how rapidly you will get Catalyst Heart up and operating using Relaxation-API utilizing only one device.

For the Microsoft Home windows setting, DNS and DHCP providers are carried out utilizing a PowerShell script for velocity of implementation. This permits us to rapidly add DHCP Scopes and DNS Entries for the required providers within the lab setting.

However wait there’s extra…

Templates

We use templates throughout the lab to configure all of the {hardware} gear, in preparation for the Plug and Play onboarding of the entry change, after which deploy the DayN Composite template to fully configure the change in essentially the most dynamic method attainable permitting for using low-impact mode depending on what kind of machine is plugged into the change. All templates and tasks for Catalyst Heart within the lab are downloaded as JSON recordsdata and imported permitting for minimal arrange time.

There are such a lot of superior configurations provided throughout the lab that point ought to be spent after set as much as delve into and perceive all of them. Upon getting mastered all these ideas you need to be on the level the place you’ll be able to take care of most automation duties demanded in fashionable enterprise networks.

Matters

The varied matters we are going to contact on and deploy throughout the lab encompass the next:

1. Integrating Catalyst Heart and Id Companies Engine through PxGrid
2. Utilizing Relaxation-API to configure Catalyst Heart through Postman Command Runner
3. Using Discovery to onboard community gadgets
4. Provisioning Common and Composite Templates to Found Units
5. Pattern PowerShell scripts to simplify DHCP and DNS deployment
6. Plug and Play (PnP) Onboarding of Units
7. Common and Composite Templates for Routers and Switches
8. Autoconf and Embedded Occasion Supervisor
9. IBNS 2.0 configuration
10. Working with  Id Service Engine (ISE) Profiling and Insurance policies

Use Instances

We’ll cowl the Matters above in a number of use circumstances to indicate the aptitude and adaptability of the templating engine inside Catalyst Heart. On this lab we make the most of Velocity language. Equally, we are able to make the most of the Jinja2 language though not on this lab. These had been the matters within the earlier lab we coated that are related:

1. Renaming interfaces
2. Constructing Stacks
3. Assigning port configuration
4. Autoconf port configuration
5. Non SDA IBNS 2.0 port configuration

With that, the lab makes use of these matters;

We’ll achieve a sensible understanding of the steps related to organising a Catalyst Heart and an setting to help advanced, superior, common templates to ship machine configuration throughout these labs. The labs intention to assist engineers in quickly starting utilizing Catalyst Heart automation and assist them work in the direction of a worldwide template technique. Moreover, these labs will give clients a everlasting place to check out the common and composite templates and embody configurations for varied use circumstances. Lastly, this setting will allow engineers to scale back the effort and time wanted to instantiate the community.

Further issues coated within the lab;

Autoconf

In these labs, we use Autoconf, an answer that manages port configurations for information or voice VLAN, high quality of service (QoS) parameters, storm management, and MAC-based port safety on finish gadgets to deploy configuration in an automatic method within the entry layer of a community. System classification is enabled while you allow the Autoconf characteristic utilizing the autoconf allow world configuration mode command. The machine detection acts as an occasion set off, which in flip applies the suitable automated template to the interface. When the Autoconf characteristic is enabled utilizing the autoconf allow command, the default Autoconf service coverage is utilized to all of the interfaces. For extra details about Autoconf. Autoconf and service-policies presently can’t co-exist on the identical interface and so for interfaces which have templates statically assigned to the interface with service-policy attachment for authentication we could make use of different strategies to make the interface Dynamic.

EEM scripts

EEM scripts use some sort of occasion to set off them. Inside the EEM script, you’ll be able to reconfigure interfaces, ship occasion notifications through e mail and far more. On this lab we use EEM scripts to reconfigure interfaces on a down occasion to a base closed authentication template, and modify them to low impression mode when a PoE Energy up occasion is detected. The makes use of for such a script are quite a few, and this lab covers one particular use case however an imaginative thoughts can provide you with many different makes use of for such a characteristic.

Self-Destructing EEM scripts

Self-Destructing EEM scripts are those who delete themselves on termination. Inside the EEM script, code removes the EEM applet from the configuration, after which writes the configuration to NVRAM. The makes use of for such a script are quite a few, and this lab covers one particular use case however an imaginative thoughts can provide you with many different makes use of for such a characteristic.

IBNS 2.0 Configuration

Whereas not masking all of the elements of IBNS 2.0, we cowl the configuration that we could implement in an effort to permit for automating host onboarding inside a non-SD-Entry campus community. These ideas whereas not constructed into a proper UI inside Catalyst Heart for legacy networks permit organizations that want to automate their infrastructure the possibility to automate.

The format of the code inside all these sections of the lab is in a straightforward copy-to-paste window permitting you to import them into Catalyst Heart just by pasting them into the editor.

Beginning…

Inside DCLOUD, a number of sandbox-type labs can be found. These self-contained environments are there to assist you to use them as you please throughout the time scheduled. As well as, this enables us a spot to begin training varied ideas with out concern of impacting manufacturing environments.

In consequence, we hope to demystify a number of the complexities of organising automation and assist information clients by the caveats. Subsequently, to assist clients within the transition towards automation, we’ve got put collectively a set of small useful labs inside a GitHub repository. On this method, these self-guided labs present a glimpse into the basics of constructing velocity templates and provide examples that you would be able to obtain and increase from. As well as, the pattern templates and JSON recordsdata provided are for straightforward import into Catalyst Facilities’ template editor for faster adoption. Lastly, some scripts are ready-made excerpts of code that assist you to construct the setting to check.

Inside the Wired Automation lab, within the Superior Automation module, we step-by-step delve into superior automation strategies and methods to make the most of them to unravel varied use circumstances. Second, we offer solutions and explanations to lots of the questions that come up throughout automation workshops. We hope that you just discover the knowledge each useful and informative.

The place can I check and check out these labs?

DCLOUD Lab Setting

To assist clients succeed with Cisco Catalyst Heart automation, you might make the most of the above labs as they’ve been designed to work inside DCLOUD’s Cisco Enterprise Networks {Hardware} Sandbox Labs in both:

1. Cisco Enterprise Networks {Hardware} Sandbox West DC
2. Cisco Enterprise Networks {Hardware} Sandbox East DC

The DCLOUD labs assist you to run these labs and offers an setting to strive the assorted code samples. Chances are you’ll select to develop and export your code to be used in manufacturing environments. Additionally, this offers you an setting the place you’ll be able to safely POC/POV strategies and steps with out harming your manufacturing environments. The DCLOUD setting additionally negates the necessity for delivery gear, lead instances, and licensing points wanted to get shifting quickly. Please do adhere to the perfect practices for the DCLOUD setting when utilizing it.

Lab Connectivity

The setting permits for a web-based browser consumer for VPN-less connectivity. Moreover, there’s AnyConnect VPN consumer connectivity for many who want it. Select the Cisco Enterprise Community Sandbox. Moreover, you might select from our San Jose and RTP Amenities labs by both deciding on US East or US West. To entry this or different content material, demonstrations, and labs in DCLOUD, please straight work together with your Cisco or Associate Account Group. Your Account groups will schedule the session and share it so that you can use. As soon as booked, observe the information inside GitHub to finish the duties adhering to the perfect practices of the DCLOUD setting.

Content material

The Wired Automation labs, Superior Automation module content material is positioned throughout the current DNAC-TEMPLATES repository to provide a one-stop-shop for all the mandatory instruments, scripts, templates, and code samples. Inside it are seven labs, which construct upon the tutorials to check the strategies in a lab setting. The repository was featured in a earlier submit on Cisco Blogs about Catalyst Heart Templates earlier in Could 2021.

Further Info

Catalyst Heart Template Labs

The beforehand named DNAC Template LABS throughout the DNAC-TEMPLATES GitHub repository goals to information you thru the standard steps required to allow the assorted automation duties delivered by Catalyst Heart. This lab will give examples of templates utilized in Catalyst Heart that we are able to modify for our use and check on gear throughout the LAB setting. Further data throughout the lab gives a well-rounded rationalization of Automation strategies with Templates. Lastly, the lab permits for purchasers to make use of Catalyst Heart workflows to apply deploying Onboarding, DayN Templates, and Software Coverage automation on each Wired and Wi-fi Platforms.

The aim of this lab is for it to be a sensible information to assist engineers to quickly start utilizing Catalyst Heart automation and assist them work in the direction of a deployment technique. Moreover, this lab will give clients a everlasting place to check out the configurations for varied use circumstances. Lastly, this setting will allow engineers to scale back the effort and time wanted to instantiate the community.

In consequence, you’ll achieve expertise in organising Plug and Play onboarding and templates and using all options. Moreover, you’ll use superior templating strategies and troubleshooting instruments. These could assist throughout faultfinding to find out what’s failing in a deployment.

Catalyst Heart Labs

Please use this menu to navigate the assorted sections of this GitHub repository. Inside the a number of folders are examples and rationalization readme recordsdata for reference. There are actually two units of labs, and these are being frequently expanded upon.

In conclusion, for those who discovered this set of labs and repository useful,

please fill in feedback and suggestions on the way it could possibly be improved.

We’d love to listen to what you suppose. Ask a query or go away a remark under.
And keep related with Cisco on social!

Try our Cisco Networking video channel

Subscribe to the Networking weblog

Share: